2: Setup and Installation
Rev 2 May.17
Safe Handling Recommendations
To help prevent accidental damage to the mangOH Red:
•
Use safe ESD-handling practices (such as wearing proper ESD straps) to avoid
possible ESD damage.
•
Avoid touching the CF3 module (J200). These pins can be damaged if caught on
clothing or other materials.
Figure 2-1: Safe Handling Recommendations—CF3 Socket (Do Not Touch)
•
Optionally, attach standoffs (not included) to the mounting holes at each corner of
the board to avoid damage to components on the bottom side of the board.
Figure 2-2: Module with Standoffs
J200 — CF3 module slot
Standoffs (4 corners)
8
2
41110400