Usb Host Connection; Control Connections; Console Usb Connector - mangOH Red User Manual

Hardware Setup and Features

USB Host Connection

The mangOH Red includes a USB 2.0 Host port (CN304) for attaching a peripheral
device, memory stick, etc.
1—USB Host port
Figure 3-24: USB Host Port

Control Connections

Console USB Connector

The mangOH Red includes a micro-USB 2.0 connector (CN305) for console access.
By default, this port is enabled and configured to connect to the CF3 module's
two-wire UART interface (UART2).
The connection can be used to access the CF3 module's Linux console (on Smart
CF3 modules), the Wi-Fi/BT chipset's console, and to install firmware downloads on
the CF3 module or Wi-Fi/BT chipset.
Console micro-USB Connector
Figure 3-25: Console USB Output Connection
Rev 2 May.17 25 41110400