Introduction; Mangoh Green Components And Accessories - mangOH green User Manual

1: Introduction

Table 1-1: mangOH green Components
Item
mangOH green
CF3 module(s)
(See Table 1-2 on page 8
for a list of compatible
Sierra Wireless modules.)
CF3 module cover and
cover removal tool
Micro-USB cable
Rev 2 Jan.16
This user guide explains how to set up and begin using the mangOH™ green with
CF3 (Common Flexible Form Factor) modules.
Once you have the mangOH green set up, visit
documentation, code samples, and other materials.
mangOH green Components and
Accessories
Table 1-1 details the required and optional components needed to begin using the
mangOH green in your development environment. Some of these components are
available in mangOH development kits (kit contents are supplier-dependent).
Pre-configured development board.
The mangOH green supports CF3 modules.
•
Primary (required)—Used in the primary CF3 socket, the module
includes a cellular modem and an application processor running
Legato, an open source embedded platform built on Linux for
hosting IoT applications (see
•
Secondary (optional)—[Future Use] Used in the secondary CF3
socket, the module includes a cellular modem that must be associated to an application
processor in the primary CF3 socket.
(In this socket, only the inner ring of pins of the CF3 footprint are used.)
Industrial-quality snap-in module cover, plus cover removal
tool to disconnect the cover from the mangOH green
(Note: The cover and tool shown are for WP-series
modules. A similar cover and tool (not displayed) are used
for HL-series modules.)
Connects computer to the mangOH green for
communication and to provide power for non-transmitting
tests.
mangoh.io
Details
legato.io for details).
6
for developer
4117164
1