Introduction; Mangoh Yellow Components And Accessories - mangOH Yellow User Manual

1: Introduction

This user guide explains how to set up and begin using the mangOH
Factor) modules.
Once you have the mangOH Yellow set up, visit
documentation, code samples, and other materials.

1.1 mangOH Yellow Components and Accessories

Table 1-1 details the required and optional components needed to begin using the mangOH Yellow in your
development environment. Some of these components are available in mangOH Yellow development kits (kit
contents are supplier-dependent).
Table 1-1: mangOH Yellow Required and Optional Components
Item
(1) mangOH Yellow with
integrated WP7702
CF3 module
(2) Micro-USB cables
(Included in kit)
(1) Antenna, Ultra Wide
Band
(Included in kit)
IoT breakout board
M2 screws
(Included in kit)
Audio cable (3.5 mm)
(Not included in kit)
Rev 2 10/21/19
mangoh.io/mangoh-yellow-resources
Details
Pre-configured development board for CF3 modules
The integrated (soldered-down) WP7702 module includes a
cellular modem and an application processor running Legato,
an open source embedded platform built on Linux for hosting
IoT applications (see legato.io
Connects computer to the mangOH Yellow for communication
and to provide power for non-transmitting tests.
Main RF antenna included.
Breakout board for mangOH Yellow's IoT connector
Two M2 screws included for IoT card installation
Optional audio cable or headset
6
®
Yellow with CF3 (Common Flexible Form
for details).
for developer
Example
41113427
1