mangOH Red User Guide
Rev 2 May.17
Figure 3-6: Removing the Module Cover
3. Lift the cover off the module.
4. Carefully lift the module straight up out of the socket.
Power Supply Sources
The mangOH Red is powered via either of the board's micro-USB connectors or an
optional backup battery. The micro-USB connectors can connect to a computer's USB
port or, if greater power is required, to an AC adapter.
Table 3-1: mangOH Red Power Supplies
Supply
CN305—Console USB
connector
Primary
CN801—CF3 USB
connector
Backup
CN802—Battery
Provides a serial connection to the mangOH Red.
Provides access to CF3 interfaces (ECM port, AT port, etc.)
An optional Li-ion or Li-polymer (3.7 V nominal)
rechargeable battery can be installed to power the board if
the primary power supply fails.
14
Details
41110400