Table of Contents
Advertisement
4: Software Setup
Rev 2 May.17
This chapter describes software resources that you will need on your computer to
access the mangOH Red and develop applications for its CF3 module.
Sample applications and instructional materials are available from the sites
mentioned in this chapter. For detailed information on developing for the
mangOH Red, see the mangOH Red Developer's Guide and related documents
(available from mangoh.io).
Install / Update Windows Driver
If you are using a Windows computer, you must install the Legato driver for the CF3
module that you install in your mangOH Red.
1. Visit
mangoh.io
to download the Windows driver and driver installation instruc-
tions for your CF3 module.
2. Install the Windows driver.
3. When the mangOH Red is connected via USB to the computer, display the
Device Manager (Control Panel > System > Device Manager).
Figure 4-1: Windows Device Manager
If the driver installed correctly, you will see the following items listed:
•
Modems > Sierra Wireless WWAN Modem (This is the module in socket J200.)
•
Ports [COM & LPT] > Sierra Wireless AT Command Port
•
Ports [COM & LPT] > Sierra Wireless DM Port
34
4
41110400
Advertisement
Table of Contents
