Rev 2 May.17
•
Ports [COM & LPT] > Sierra Wireless NMEA Port (This is the port that you will
use to communicate with the module from your terminal emulator.)
Install a Terminal Emulator
To communicate with the mangOH Red, you need a terminal emulator program such
as Tera Term or HyperTerminal
When you have an emulator installed, use it to establish a console connection to the
mangOH Red:
•
Port—Serial modem COM port (for Sierra Wireless devices, this is the Sierra
Wireless NMEA Port)
•
Baud rate—115200
Install the Legato Developer Studio
To create Legato applications for the CF3 module, download and install the Open AT
Developer Studio (a Legato IDE) available at mangoh.io.
Download Firmware Updates
Firmware updates will be made available for download from mangoh.io.
Write Your First Program
For instructions on building applications (including writing a 'Hello World' program to
test your mangOH Red), and to download sample Legato applications, visit
mangoh.io.
®
.
35
Software Setup
41110400