mangOH Red User Manual page 18

mangOH Red User Guide
Rev 2 May.17
To connect an antenna to the Main, Diversity or GNSS antenna connector:
1. Place the mangOH Red face-up.
3
Figure 3-11: Antenna Connector Locations
2. Attach the antenna cable's female connector to the board's male connector and
press firmly to get a secure connection.
(Note that female connectors are rated for a limited number of reconnects before
the connector wears out, so should be left connected if possible. Use a U.FL
extraction tool to put less strain on the connector during removal.)
Figure 3-12: Main Antenna Connected
1—Main (CN301)
18
1
2
1—Main (CN301)
2—GNSS (CN303)
3—Diversity (CN302)
41110400