Rev 2 May.17
Figure 3-20: IoT Expansion Card Inserted
To remove an IoT Expansion Card:
1. Remove the two screws.
2. Pull the expansion card straight out, using safe ESD-handling practices (such as
wearing proper ESD straps).
For detailed IoT Expansion Card slot interface information, refer to the mangOH Red
Developer's Guide. For detailed information about expansion cards, refer to the IoT
Expansion Card Specification.
Peripheral Connectors
Raspberry Pi Connector
CN307 is a 26-pin connector that provides access to primary Raspberry Pi Rev B pin
functions.
Raspberry Pi-compatible connector
Figure 3-21: Raspberry Pi Connector
23
Hardware Setup and Features
Mounting screws
41110400