Notes On Ce Identification; Proper Use - MICRO-EPSILON colorCONTROL MFA-5 Instruction Manual

Safety
1.3
The following applies for the colorCONTROL MFA-5: EMC Directive 2004/108/EC
Products which carry the CE mark satisfy the requirements of EMC Directive 2004/108/EC for electromagnetic
compatibility. The EC declaration of conformity is kept available according to EC regulation, article 10 by the
authorities responsible at
MICRO-EPSILON Eltrotec GmbH
Manfred-Wörner-Straße 101
73037 Göppingen / Germany
The system is designed for use in industrial and residential areas and satisfies the requirements of the stan-
dards
- EN 61000-6-3: 2011-09
- EN 61000-6-2: 2006-03
The system satisfies the requirements if they comply with the regulations described in the instruction manual
for installation and operation.
1.4
The colorCONTROL MFA-5 is a testing system that uses an opto-electronic sensor in combination with a fiber
optic cable (POF 2.2 mm) to test intensity, color and function of illuminants such as LEDs and incandescent
bulbs.
- The system may only be operated within the limits specified in the technical data, see Chap.
- Use the testing system in such a way that in case of malfunctions or failure personnel or machinery are not
- Take additional precautions for safety and damage prevention for safety-related applications.
colorCONTROL MFA-5

Notes on CE Identification

Proper Use

endangered.
2.
Page 8