2.3.7
Project Download and Debug
Following a successful build, download the program image of the active project to the target board. To download
the program image, select the [Project] > [Download and Debug] in IAR EWARM menu (Figure 2.3.7.1).
When the active project is "Debug" build, the program image is loaded in the internal RAM and debugging is
started. When the active project is "DebugFlash" build or "ReleaseFlash" build, the program image is loaded in
the internal flash memory and debugging is started.
Figure 2.3.7.1 Download and Debug
Seiko Epson Corporation
13
S1C31D01 Peripheral Circuit
Sample Software Manual (Rev.3.00)