Table of Contents
Advertisement
2.4.6
Project Build
To build an active project, select one of the build commands [Build] and [Rebuild] from the [Project] in the
uVision menu (Figure 2.4.6.1).
Note: If linker errors occur in the build, there is a possibility that the library projects "sePeriphLibrary" and
"seGraphicsLibrary" are not built. Build these library projects, and then build the active project again.
The Batch Build option, found under [Project] > [Batch Build] in the uVision menu, can be used to build all the
Examples and by default constructs both the Debug and DebugFlash builds for each of the appropriate projects.
The projects in the list are ordered such that the libraries are built first (Figure 2.4.6.2).
Figure 2.4.6.1 Build Commands
Figure 2.4.6.2 Batch Build
Seiko Epson Corporation
21
S1C31D01 Peripheral Circuit
Sample Software Manual (Rev.3.00)
Advertisement
Table of Contents
