Appearance Of Valuecut; The Front View; The Back View - MUTOH VC-600 User Manual

1.4

Appearance of ValueCut

1.4.1 The Front View (Şekil 1-1)
Grid Drums
the media back and
forth during operation.
Slicer Groove
–
slice off the extra
media easily along
this groove.
Platen
provides the
–
surface for holding and
supporting media while
performing cutting.
1.4.2 The Back View (Şekil 1-2)
Lever
–
raises or lowers the
pinch rollers.
General Information
move
–
Alignment Rulers
media can be aligned
with the clear guide line
marks.
Şekil 1-1
Pinch Rollers
–
hold the media during
cutting.
Şekil 1-2
Tool Carriage
cutting with the installed blade
and pen with AAS module.
–
Cutting Pad
protection of blade when the blade is
cutting.
1-3
ValueCut Kullanım Kılavuzu
performs the
–
Control panel
consists of 14
–
control keys and 1 LED and 1 LCM
showing messages and menus.
provides the
–