Protective Class Ii Appliances - ILLKO REVEXplus USB User Manual

User's Manual

4.6.1. Protective class II appliances

1
2 Connect tested appliance
3
Switch on tested
4
appliance
Press the test tip
connected to the I
terminal against
5
exposed conductive
part of tested
appliance.
Switch off tested
7
appliance
8
9
Proceed once more with above described procedure from Step 3 to Step 8.
Fig. 11 – Touch leakage current of protective class II appliances measurement
Step 1 - preparation for measurement
•
Connect test lead P2011 with test tip P3011 to the I
•
Accomplish preparation for measurement described in chapter 4.5.1. Step 1.
Step 2 – measurement with L-N default
Press and release either the I
•
press and release corresponding key once more in order to turn off the indicator (INV).
Press the START key. It is recommended to lock the measurement - press the
•
START key and then press the LOCK key. Release both keys. The presence of
Copyright © 2006–2019 ILLKO, s.r.o.
INV
EXT
I
PE
PRO TEC T
ST ART
Ca l
LO C K
D
ST ART
INV
I
PE
EXT
PROTEC T
 or the I
PE
  
M K
A A V
m

W VA
cos
ST ART ST ART S T ART S T ART
  
M K
A A V
m

W VA cos
terminal.
D
 key. If the indicator (INV) lights up, then

23
REVEXplus, REVEXplus USB
Function selection
Connect tested appliance to
test socket 1
Test socket 1 energizing
(Locking of the START
key)
Touch leakage current
measurement
End of measurement
with L-N default
Test socket 1 deenergizing
(Unlocking of the START
key)
L-N reversal in test socket 1