Table of Contents
Advertisement
User's Manual
1. INTRODUCTION
All information, instruction and warnings stated in this User's Manual are applicable
both for REVEXplus and REVEXplus USB unless otherwise stated.
1.1. Safety
Read this User's Manual carefully and completely and follow all instructions
contained therein. Otherwise using of the instrument may be dangerous for
operator, for appliance under test or for the instrument!
Observe the following safety precautions:
•
Make sure that the instrument, measuring cables and all other accessories are in flawless
condition, e.g. no damaged insulation, no broken cables or plugs etc.
•
The instrument may be powered only from 230 V / 50 ÷ 60 Hz grounded mains outlet,
which is protected with a fuse or circuit breaker with a maximum rating of 16 A.
•
Only a trained, skilled person, who is familiar with hazardous voltage operations, can
handle the REVEXplus. Unexpected hazardous voltages can occur at appliance under test
(dangerously charged capacitors etc.).
•
It is necessary to respect all safety regulations applicable to particular measurement.
•
Test Socket 1 of the REVEXplus must not be used for continuous power supply of
appliance. It is intended for test purposes only; max. test duration is 60 s @ 16A.
•
Dangerous voltage or mains voltage may be present on Test Socket 1 during some tests.
•
Appliance under test connected to Test Socket 1 of the REVEXplus can be powered by
mains voltage during some tests. The appliance can thus be activated.
•
The PE terminal is connected to PE terminal of Test Socket 1. Similarly, the I
is electrically connected to PE terminal of Test Socket 1. When using the REVEXplus,
do not connect any voltage to the terminals PE or I
electric shock or damage of the REVEXplus.
•
Use only standard or optional accessories supplied with the REVEXplus by your
distributor.
If there is reason to believe that safe operation has become impossible, put
the instrument out of operation and secure it against any unintended operation.
Safe operation must be presumed to be no longer possible, if:
•
The instrument does not operate properly any longer.
•
The instrument, cables, connectors, plugs or accessories exhibits visible damages.
•
The instrument was stored under unfavourable conditions for a long period.
•
The instrument was exposed to extraordinary stress caused by transport.
1.2. Explanation of symbols on instrument
Warning concerning a point of danger! Read User's Manual and observe all precautions!
Protection class (double insulation).
Copyright © 2006–2019 ILLKO, s.r.o.
REVEXplus, REVEXplus USB
. Otherwise there is a danger of
D
4
terminal
D
Advertisement
Table of Contents
