User's Manual
1.3. General description
The REVEXplus is professional portable appliance tester with many features packed into very
compact case. The REVEXplus has extraordinary wide scope of use thanks to a lot of optional
accessories, which enables to test practically any portable or hard-wired, one-phase or three-
phase appliance.
FEATURES:
• Earth bond test 200 mA AC.
• Insulation resistance test 500 V DC.
• Measurement of substitute leakage current and touch leakage current.
• Measurement of differential leakage current and touch leakage current, possibility of L-N
reversal in test socket.
• Measurement of PE current during operation and touch leakage current, possibility of L-N
reversal in test socket.
• Functional test of tested appliance: active power consumption (W), apparent power
consumption (VA), current (A), cos φ.
• Mains voltage.
• Measurement of PE current during operation by means of optional current clamp.
• Measurement of differential leakage current by means of optional current clamp.
• Measurement of current by means of optional current clamp.
• Functional test of tested appliance by means of optional current clamp: active power
consumption (W), apparent power consumption (VA), and cos φ.
• Measurement of PE current during operation and differential leakage current of three-phase
portable appliance by means of optional adapters.
• USB communication (REVEXplus USB only).
The REVEXplus has furthermore additional features, which improves the safety of both
operator and the equipment under test:
• Automatic check of dangerous contact voltage on PE of power outlet, from which the
REVEXplus is powered.
• Automatic check, if PE of power outlet (from which the REVEXplus is powered) is
grounded.
• Automatic check of leakage current amplitude of equipment under test.
• Automatic check of external voltage absence during earth bond test.
• The possibility to promptly test the basic functionality of the REVEXplus (built-in normal).
Copyright © 2006–2019 ILLKO, s.r.o.
REVEXplus, REVEXplus USB
5