Table 56: Fibre Options menu (Services menu) (continued)
Function
Port/Node Names...
Set Port 0...
Set Port 1...
Note:
1. Supplemental Message Line 1: Port0 ID=aa bb cd
2. Supplemental Message Line 2: Port1 ID=aa bb cd
Cancel
Causes the "Services menu" on page 97 to display.
Port/Node Names
Displays the Port/Node Name that is assigned to the drive.
Set Port 0...
Causes the "Set Port 0 {or 1} menu (Services menu)" on page 101 to display.
Set Port 1...
Causes the "Set Port 0 {or 1} menu (Services menu)" on page 101 to display.
Note: Refer to "Messages and supplemental messages (Fibre Channel only)" in Table 44 on page 79 for
fibre-addressing information.
Port/Node Names menu (Services menu)
Table 57 on page 101 shows the Port Names and Node Names menu items.
Table 57: Port/Node Names menu (Services menu)
Function
Port Names/WWID
0=5005076302400143
1=5005076302800143
Node Name/WWID
0=5005076302000143
1=5005076302C00143
Note:
1. Supplemental Message Line 1: Port0 ID=aa bb cd
2. Supplemental Message Line 2: Port1 ID=aa bb cd
Port 0 Name
Displays the 16-byte Port Name that is assigned to the Port.
Port 1 Name
Displays the 16-byte Port Name that is assigned to the Port.
Note: Refer to "Messages and Supplemental Messages (Fibre Channel Only)" in Table 44 on page 79 for
fibre-addressing information.
Set Port 0 {or 1} menu (Services menu)
Table 58 on page 102 shows the Set Port 0 menu and the Set Port 1 menu items.
Next menu
"Port/Node Names menu (Services menu)" on page 101
"Set Port 0 {or 1} menu (Services menu)" on page 101
"Set Port 0 {or 1} menu (Services menu)" on page 101
Next menu
"Fibre Options menu (Services menu)" on page 100
"Fibre Options menu (Services menu)" on page 100
Virtual Operator panel 101