Ce Utilities Menu; Ce Read Tape Menu - IBM 3592 Maintenance Information

Table 106: CE Temp Error Log menu (continued)
Function
CLEAR LOG
CURRENT TIMESTAMP
ddddd Days hh:mm:ss
--OR--
yyyy:mm:dd
FID 85 FID FF
3626 3341 22C3
0021 08:00:05
VOLSER: UNKNOWN
Cancel
Causes the "CE Logs menu (CE Offline Mode)" on page 133 to display.
No Entries
Indicates that no entries are in the Error log. Choosing this option causes "CE Logs menu (CE Offline
Mode)" on page 133 to display.
CLEAR LOG
Allows the CE to erase the error log. This option is displayed only when there is at least one entry in
error log. Choosing this option causes "CE Logs menu (CE Offline Mode)" on page 133 to display.
CURRENT TIMESTAMP
Provides a current time stamp that depicts when the error occurred. For a full description of this field,
see "Time stamp for CE Error Log" on page 135.
FID yy yy
Provides the FID identifier (yy yy), characters of support data, and the current time stamp. The
characters of support data include the fault symptom codes (aaaa, bbbb), the model number (c), and
the microcode link (ccc). A time stamp follows. The last entry is the Volume Serial number. If the
Volume Serial number is not known, it shows "UNKNOWN". Choosing this option causes "CE Logs
menu (CE Offline Mode)" on page 133 to display.
Only the last 10 entries in the log are displayed. If a fault is detected and the log contains 10 entries, the
oldest entry is scrolled off the end and the newest error is put in position 1 (the first position in the list).

CE Utilities menu

Table 107 on page 138 shows the CE Utilities menu items.
Table 107: CE Utilities menu
Function
Cancel
Calibrate Drive
Disp Sensors...
Disp/Alt VPD...
Microcode Trap...
Read Tape...
Show Statistics...
138 IBM 3592 TS1140, TS1150, TS1155, and TS1160 Tape Drives: Maintenance Information
Next menu
"CE Logs menu (CE Offline Mode)" on page 133
"CE Logs menu (CE Offline Mode)" on page 133
"CE Logs menu (CE Offline Mode)" on page 133
Next menu
"CE Options menu" on page 107
"Load Scratch Tape menu" on page 117
"CE Disp Sensors menu (CE Online Mode)" on page 154
"CE Disp/Alt VPD menu" on page 139
"CE Microcode Traps menu" on page 140
"CE Read Tape menu" on page 141
"Show Statistics menu (CE Online Mode)" on page 154