Table 89: CE Default Density menu (continued)
Function
FF - From Medium*
Cancel
Causes the "CE Drv Options menu" on page 119 to display.
00 - Default
Allows the CE to maintain the native write density for the drive model that you are using. The default.
54 - E07 (3592A4)
Allows the CE to set a drive to E07 density. Thus, the drive can write from BOT on supported tape
cartridges in E07 format.
55 - E08 (3592A5)
Allows the CE to set a drive to E08 density. Thus, the drive can write from BOT on supported tape
cartridges in E08 format.
56 - 55F (3592B5)
Allows the CE to set a drive to 55F density. Thus, the drive can write from BOT on supported tape
cartridges in 55F format.
57 - 60F (3592A6)
Allows the CE to set a drive to 60F density. Thus, the drive can write from BOT on supported tape
cartridges in 60F format.
FF - From Medium*
Allows the CE to use the currently recorded density. Use '00 - Default' for uninitialized tape cartridges.
Note: See Table 13 on page 26 for supported cartridges and Table 156 on page 249 for supported density
modes.
CE Wrap Tools menu
Table 90 on page 127 depicts the CE Wrap Tools menu items.
Table 90: CE Wrap Tools menu
Function
Cancel
RS422 : (Not) Prsnt
RS422 : Present
Cancel
Cancels the operation and returns to the previous menu.
RS422 : (Not) Prsnt
An RS-422 wrap plug is not attached.
RS422 : Present
An RS-422 wrap plug is attached.
CE VPD Data menu
Table 91 on page 128 depicts some CE VPD data.
Next menu
"CE Save Data menu (Root, Port, and Node names)" on page 132
Next menu
"CE Drv Options menu" on page 119
"CE DRV Ser No menu" on page 152
"CE VPD Data menu" on page 127
Virtual Operator panel 127