San Volume Controller 2145-8F4 And San Volume Controller 2145-8F2 Fibre-Channel Port Numbers And Worldwide Port Names; Power Connector; The Physical Port Numbers For The San Volume Controller 2145-8F4; The Physical Port Numbers For The San Volume Controller 2145-8F2 - IBM 2145-8F2 Hardware Installation Manual

Figure 13 shows the type of connector that is located on the power supply
assembly. The connector enables you to connect the SAN Volume Controller
2145-8F2 to the power source from the uninterruptible power supply.
Figure 13. Power connector
SAN Volume Controller 2145-8F4 and SAN Volume Controller 2145-8F2
fibre-channel port numbers and worldwide port names
The SAN Volume Controller 2145-8F4 and SAN Volume Controller 2145-8F2
fibre-channel ports are identified by their physical port number and by a
worldwide port name (WWPN).
Figure 14 provides a view of the rear of the SAN Volume Controller 2145-8F4.
Figure 14. The physical port numbers for the SAN Volume Controller 2145-8F4
Figure 15 provides a view of the rear of the SAN Volume Controller 2145-8F2.
Figure 15. The physical port numbers for the SAN Volume Controller 2145-8F2
The physical port numbers identify fibre-channel cards and cable connections
when you perform service tasks. The WWPNs are used for tasks such as
fibre-channel switch configuration and to uniquely identify the devices on the
SAN.
The WWPNs are derived from the worldwide node name (WWNN) of the SAN
Volume Controller node in which the card is installed.
8
Ethernet port 1
Neutral
Ground
Live
2
1
1
2
3
4
3 4
Chapter 1. SAN Volume Controller overview
15