Figure 38 - Terminate Input Wiring - Rte Pir Motion Sensor - Keyscan CA250 Series Technical Manual

Figure 38 – Terminate Input Wiring – RTE PIR Motion Sensor
Door Inputs - A Common
1 2 3 4 5 6 7 8
NO = Normally Open
Non-supervised
PIR
RTE (Request to Exit) – ½ second pulse
Determines the amount of time the output relays will energize when motion is detected.
Supervision level set in Client software:
System VII & Vantage – Site Unit Setup
Aurora – Hardware Setup
Supervision level applied to all door inputs, RTE inputs, and auxiliary inputs.
Single end of line
supervision
KI-00131E-10-13
Keyscan Inc. – Technical Guide (PC109x - 07.15)
Cut View of CA8500B
RTE Inputs - B Common AUX Inputs - C
1 2 3 4 5 8 1 2 3
6 7
COM
NO
Lens
PIR (Request To Exit)
to
Request
to Exit
1K
NO
Double end of line
supervision
Common AUX Inputs - D
4 5 8 9 10 11 12 13
6 7 14 15
Notes
Diagram illustrates CA8500B. Connections also apply to
CA250B & CA4500B.
- CA250B – up to 2 Request to Exits
- CA4500B – up to 4 Request to Exits
- CA8500B – up to 8 Request to Exits
to Common Return
COM
Lens
to
Request
to Exit
to Common Return
1K
3K
COM
NO
Lens
Common AUX Inputs - E
16 17 18 19 20 21 24
22 23
57