Figure 64 - Hid Iclass Rk40 Series - Keyscan CA250 Series Technical Manual

Versions
- KRK40L
- KRK40SE
- KRPK40L
- RK40HGOV
- RPK40GOV
Shield not connected.
Isolate with electrical tape.
Isolate and tape back
unused conductors.
ACU Ground
KI-00511E-10-13
Keyscan Inc. – Technical Guide (PC109x - 07.15)
Figure 64 – HID iClass RK40 Series
1 2
5
4
7 8
0
*
6 conductors
shielded 22 AWG
Maximum - 500 ft
(152.4 m)
Lug
Shield
C1 LED D1 D0
(BEEP) WHT GRN
Reader terminal on control board
Yellow (Beeper) used for pre-
3
alert otherwise isolate and
tape back.
6
If connecting external sound
device, see Pre-Alert Relay
9
Option or refer to ACU cut
sheet enclosed with panel for
#
ACU/OCB8 relay
assignments.
Note - If Pre-alert is
connected, SE multiclass
reader may not transmit
HID 125 kHz-compatible
card during the pre-alert
beep.
Shield not connected.
Isolate with electrical tape.
PWR GND
RED BLK
85