YASKAWA Motoman XRC Function Manual page 17

• Perform the following inspection procedures prior to conducting manip-
ulator teaching. If problems are found, repair them immediately, and be
sure that all other necessary processing has been performed.
-Check for problems in manipulator movement.
-Check for damage to insulation and sheathing of external wires.
• Always return the programming pendant to the hook on the XRC cabinet
after use.
The programming pendant can be damaged if it is left in the manipulator's work area, on
the floor, or near fixtures.
• Read and understand the Explanation of the Alarm Display in the setup
manual before operating the manipulator.
Definition of Terms Used Often in This Manual
The MOTOMAN manipulator is the YASKAWA industrial robot product.
The manipulator usually consists of the controller, the playback panel, the programming pen-
dant, and supply cables.
The MOTOMAN manipulator is the YASKAWA industrial robot product.
In this manual, the equipment is designated as follows.
YASNAC XRC Controller
YASNAC XRC Playback Panel
YASNAC XRC Programming Pendant
C A U T I O N
Equipment
v
Manual Designation
XRC
Playback Panel
Programming Pendant