Esc C Sequence; Received Del; Private Mode - Printronix P5005B User Manual

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Character Set
This parameter selects a character set for the ANSI emulation.
Note that when 0876 OCR-A or 0877 OCR-B is selected as the
print language, the Font Attributes Typeface parameter is changed
to OCR-A or OCR-B, respectively. Character sets are shown in
detail in the Character Sets Reference Manual .
Printer Select
•
ON = DC1/OFF = DC3. Disables the printer when a DC1
control code is received, and enables the printer when a DC3
control code is received.
•
Disable. Ignores the DC1 and DC3 control codes.

ESC c Sequence

•
Enable. An ESC c code received from the host resets the
printer parameters to the factory defaults.
•
Disable. An ESC c code received from the host is ignored.
Received CR
•
Observe. A CR code received from the host is handled as a
Carriage Return.
•
Ignore. A CR code received from the host is ignored.

Received DEL

•
Observe. A DEL code received from the host is handled as a
Delete command.
•
Ignore. A DEL code received from the host is ignored.

Private Mode

Determines the default type of character set (Set 1 or Set 2). This
can also be set by ESC sequences ESC [>5h and ESC [>5l. Refer
to these descriptions in the ANSI Programmer's Reference Manual
for further details.
Menu
181