Printronix P5005B User Manual page 156

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Chapter 4
LinePrinter Plus Emulation
Define CR Code
This option controls the action of the printer when it receives a
Carriage Return code (hex 0D) from the host computer. If this
feature is enabled, each time the printer receives a Carriage
Return, it inserts an additional Line Feed code (hex 0A) into the
data stream. Do not use this feature if the host computer sends
Line Feeds to the printer.
•
CR = CR. Does not insert an extra Line Feed after each
Carriage Return.
•
CR = CR + LF. Inserts an extra Line Feed after each Carriage
Return. The next print position will be print position 1 of the next
line.
Auto LF
This option defines the printer action when print data is received
past the forms width setting.
•
Disable. Discards any data past the forms width.
•
Enable. Performs an automatic carriage return and line feed
when data is received past the forms width.
Overstrike
This option enables you to print bold characters.
•
Enable. Turns on bold print. When enabled, overstrike printing
slows down the printer.
•
Disable. Turns off bold print.
Define LF Code
•
LF = CR + LF. Forces an automatic carriage return with each
line feed command. The next print position is print position 1 of
the next line.
•
LF = LF. Does not perform an automatic carriage return. The
next print position will be the current print position of the next
line.
156