Printronix P5005B User Manual page 172

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Chapter 4
LinePrinter Plus Emulation
Auto LF
This option defines the printer actions when print data is received
past the forms width setting.
•
Enable. Performs an automatic carriage return and line feed
when data is received past the forms width.
•
Disable. Discards any data past the forms width.
Define LF Code
The Define LF Code option controls the action of the printer when it
receives a Line Feed code (hex 0A) from the host computer. If this
feature is enabled, each time the printer receives a Line Feed, it
inserts an additional Carriage Return code (hex 0D) into the data
stream. This feature is required if the host computer does not send
Carriage Returns to the printer.
•
LF = LF. Does not add a Carriage Return with a Line Feed.
•
LF = CR + LF. Adds an extra Carriage Return with each Line
Feed.
Printer Select
•
Disable. Ignores the ASCII DC1 and DC3 control codes.
•
Enable. Disables the printer when a DC1 control code is
received, and enables the printer when a DC3 control code is
received.
Character Set
This parameter selects a character set for the Epson emulation, as
shown in the "Epson FX Character Set Menu" on page 174. Note
that when OCR-A or OCR-B is selected as the print language, the
Font Attribute Typeface option under the LinePrinter Plus menu
(page 150) is changed to OCR-A or OCR-B, respectively.
172