Printronix P5005B User Manual page 238

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Chapter 5
Diagnosing Problems
Table 8. LCD Message Troubleshooting Table (continued)
SHUTL INV PARM* No
SHUTTLE JAM Yes
SOFTWARE ERROR No
*
STACK No
OVERFLOW*
STACKER FAULT Yes
STACKER FULL Yes
STACKER JAM Yes
TCB CORRUPTED* No
UNDEF No
INTERRUPT*
238
Fatal firmware error Contact your authorized
on controller board.
service representative.
No shuttle Check for obstruction to
movement or shuttle, a twisted ribbon,
shuttle moving at or forms thickness lever
wrong speed. closed too tightly. If fault
source is not apparent,
contact your authorized
service representative.
Application Contact your authorized
software tried to
service representative.
perform illegal
printer function, or
damaged logic
circuits found on
controller board.
Fatal firmware error Contact your authorized
on controller board.
service representative.
Stacker is not Check for obstructions in
functioning the stacker area. If fault
correctly. persists, contact your
authorized service
representative.
Power stacker is full Remove paper.
of paper.
Paper is jammed in Remove Paper.
the power stacker
area.
Fatal firmware error Contact your authorized
on controller board.
service representative.
Fatal firmware error Contact your authorized
on controller board.
service representative.
1
1
1
1
1
1