Printronix P5005B User Manual page 145

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Device Address
Allows you to set the device address from 0 through 6. The host
directs data and commands on the twinax line to a specific device
based on its unique device address. After the address has been
changed, a POR status is sent to the host.
SPC Type
Allows you to select a specific type of Simple Protocol Convertor
(SPC) Twinax emulation. MODE 219 for Model 219 protocol
convertor, MODE P5000 for Printronix protocol convertor, and
MODE IBM for the IBM protocol convertor.
Printer Type
Determines the SPC Twinax emulation "Mode." When set to Std
Centronics, IGP/VGL, or IGP/PGL, the Set Line Density and Set
Print Density commands are translated into a Carriage Return (CR)
and vertical format commands are ignored unless the EVFU is
enabled.
SFCC Char
Determines what character is printed when an EBCDIC Logical Not
character ¬ (Hex 5F) is received from the host.
EVFU
•
Enable. The EVFU parameter allows vertical format control by
the host in all four printer type modes.
•
Disable. Vertical format control is only allowed in IMPACT/P-
SERIES mode.
SPC Char Set
Allows you to select the print language character set.
SPC Twx Params
145