Table 8. LCD Message Troubleshooting Table (continued)
UNDFNED
OPCODE*
UP DRV. SHORT*
1
Before contacting an authorized service representative, power off the printer, wait 15
seconds, then power it back on and rerun your print job. If the message reappears,
press CLEAR. If the fault message still displays, then contact your authorized service
representative.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
No
Fatal firmware error
on controller board.
No
Hammer drive
circuits on the
boards shorted to
ground.
Fault Messages
Contact your authorized
1
service representative.
Contact your authorized
1
service representative.
239