Main Menu - Danfoss VLT Micro Drive FC 51 Operating Instructions Manual

4. Programming

4.5. Main Menu

The Main Menu gives access to all parameters.
1.
2.
4
3.
4.
5.
6.
7.
8.
22
To enter the Main Menu, press
[MENU] key until indicator in display
is placed above Main Menu .
Use [▲] [▼] to browse through the
parameter groups.
Press [OK] to select a parameter
group.
Use [▲] [▼] to browse through the
parameters in the specific group.
Press [OK] to select the parameter.
Use [▲] [▼] to set/change the pa-
rameter value.
Press [OK] to accept the value.
To exit, press either [Back] twice to
Quick Menu
enter , or press [Menu]
Status
once to enter .
MG.02.A2.02 - VLT
VLT Micro Drive FC 51 Operating Instructions
Illustration 4.10: Indicating Main Menu mode
® is a registered Danfoss trademark