Mechanical Installation; Before Starting - Danfoss VLT Micro Drive FC 51 Operating Instructions Manual

VLT Micro Drive FC 51 Operating Instructions

2. Mechanical Installation

2.1. Before Starting

2.1.1. Checklist
When unpacking the frequency converter,
make sure that the unit is undamaged and
complete. Check that the packaging contains
the following:
•
•
Optional: LCP and/or de-coupling plate.
2.2. Side-by-Side Installation
The Danfoss VLT Micro Drive can be mounted side-by-side for IP 20 rating units and requires 100
mm clearance above and below for cooling. Regarding surroundings in general, please see chapter
7. Specifications
Illustration 2.2: Side-by-side installation.
VLT Micro Drive FC 51
Quick Guide
.
MG.02.A2.02 - VLT ® is a registered Danfoss trademark
2. Mechanical Installation
Illustration 2.1: Content of box.
2
7