Quick Menu Parameters - Danfoss VLT Micro Drive FC 51 Operating Instructions Manual

4. Programming

4.4. Quick Menu Parameters

4.4.1. Quick Menu Parameters - Basic Settings QM1
Below are descriptions of all parameters found in the Quick Menu.
＊ = Factory setting.
4 1-20 Motor Power [kW]/[HP] (P
Range:
1-22 Motor Voltage (U
Range:
230/400
V
1-23 Motor Frequency (f
Range:
50 Hz
1-24 Motor Current (I
Range:
M-type
depend-
ent
1-25 Motor Nominal Speed (n
Range:
M-type
Depend-
ent
1-29 Automatic Motor Tuning (AMT)
Option:
18
[0.09 kW/0.12 HP -
11 kW/15 HP]
)
m.n
[50 - 999 V]
m.n
* [20-400 Hz]
)
m.n
[0.01 - 26.00 A]
*
[100 - 9999 RPM]
*
MG.02.A2.02 - VLT
VLT Micro Drive FC 51 Operating Instructions
)
m.n
Function:
Enter motor power from nameplate data.
Two sizes down, one size up from nominal VLT rating.
NB!
Changing this parameter affects par. 1-22 to 1-25,
1-30, 1-33 and 1-35.
Function:
Enter motor voltage from nameplate data.
)
Function:
Enter motor frequency from nameplate data.
Function:
Enter motor current from nameplate data.
)
m.n
Function:
Enter motor nominal speed from nameplate data.
Function:
Use AMT to optimize motor performance.
NB!
This parameter cannot be changed while motor
runs.
® is a registered Danfoss trademark