Danfoss VLT Micro Drive FC 51 Operating Instructions Manual page 21

VLT Micro Drive FC 51 Operating Instructions
6-25 Terminal 60 High Feedback Value
Range:
6-26 Terminal 60 Filter Time Constant
Range:
7-20 Process CL Feedback Resource
Range:
7-30 Process PI Normal/Inverse
Range:
7-31 Process PI Anti Windup
Range:
7-32 Process PI Start Speed
Range:
7-33 Process PI Proportional Gain
Range:
7-34 Process PI Integral Time
Range:
7-38 Process Feed Forward Factor
Range:
Function:
[-4999 - 4999] Value corresponding to P. 6-23 setting.
Function:
[0.01 - 10.00 s] Noise suppressing filter.
Function:
[] Choose [2] analog input 60.
Function:
[] Most PI controllers are "Normal".
Function:
[] Leave
Function:
[0.0 - 200.0 Hz] Choose expected normal running speed.
Function:
[0.00 - 10.00] Enter the P-factor.
Function:
[0.10 - 9999.00 s] Enter the I-factor.
Function:
[0 - 400%] Only applicable with changing set-points.
MG.02.A2.02 - VLT ® is a registered Danfoss trademark
Enabled
normally.
4. Programming
4
21