Mitsubishi Electric RD78G4 User Manual page 88

Security
Event Overview
code
10200 Remote password lock
10201 Remote password unlock successful
10202 Remote password unlock failed
10300 Access from IP restricted with IP filter setting
Operation
Event Overview
code
24100 <<Own station>> Parameter change/new parameter
reception
24307 Network No., station No., IP address setting/change
execution
24F00 <<Another station>> CPU operating status change
detection
3 TROUBLESHOOTING
86
3.7 Event List
Cause
The lock processing of the remote password was performed.
The unlock processing of the remote password was succeeded.
The unlock processing of the remote password has failed.
Accessed from IP address restricted with the IP filter setting.
Cause
Parameter was changed. Or new parameter was received at power-on.
Setting or change of the network No., station No., or IP address of the own station was
executed.
Operating status of the programmable controller CPU on another station was changed.