Mitsubishi Electric RD78G4 User Manual page 35

Setting method
Set in the "Parameter of Slave Station" window. ( Page 46 Parameter processing of a slave station)
Precautions
• A slave station whose slave station parameter automatic setting abnormally ended does not start data link, and 'Execution
result of slave station parameter automatic setting function' (SW0160 to SW0167) turns on. Check 'Detailed execution
result of slave station parameter automatic setting' (SW0194) and the event history and perform corrective actions for
stored error codes.
• Do not disconnect the slave station that is currently executing an automatic update of saved parameters. Update of
parameter may fail.
• Do not turn off the master station that is currently executing an automatic update of saved parameters. Incorrect
parameters are automatically set in the slave station at the next power-on.
• If saved parameters are not in the CPU module when executing an automatic update of saved parameters, an error
response is returned to the relevant slave station.
• Check if the checkbox of "Parameter Automatic Setting" of the slave station is selected in "Network Configuration Settings"
under "Basic Settings".
• Check if the IP address of the slave station in the "Network Configuration settings" under "Basic Settings" matches the
actual IP address of the slave station.
1
1 FUNCTIONS
33
1.6 Others