Checking the Module Status
This section describes troubleshooting to check the status of the module by executing diagnostics and operation tests using
the engineering tool.
The following items can be checked in the "Module Diagnostics" window for the Motion module.
[Error Information] tab
[Module Information List] tab
The details of the errors currently occurring and the corrective actions for these errors are displayed in the [Error Information]
[Event History] button
3.2 Checking the Module Status
Displays the details of the errors currently occurring and the corrective actions for these errors.
"-" may be displayed in "Occurrence Data" of an error that occurred immediately after the power was turned on.
Displays the LED information and individual information of the Motion module.
Enables checking the cause to resolve the problem when an error occurs in the CC-Link IE TSN. ( Page 54 Checking
the Network Status)
Major: An error such as hardware failure or memory failure. The module stops operating.
Moderate: An error, such as parameter error, which affects module operation. The module stops operating.
Minor: An error such as communication failure. The module continues operating.
Page 69 List of Error Codes
Click this button to check the history of errors that have occurred on the network, errors detected for each module, and
operations that have been executed. ( Page 84 Event List)
Displays up to three information items for each error, such as parameter information, operation source information, and
system configuration information. ( Page 82 List of Parameter Nos.)
Displays the detailed error causes.
Displays the actions to eliminate the error causes.