Mitsubishi Electric RD78G4 User Manual page 17

Term
Reserved address
Return
Routing
RWr
RWw
RX
RY
SB
Slave station
SLMP
SW
Transient transmission
Transient transmission group
No.
TSN hub
Description
An IP address reserved for special purposes, defined by RFC 6890. This IP address cannot be used when the
programmable controller is connected via the global IP network.
A process of restarting data link when a faulty station recovers from an error
A process of selecting paths for communication with other networks. There are two types of routing: dynamic routing that
auto-selects the communication routes, and static routing where communication routes are arbitrarily set.
A remote register of the link device. This refers to word data input from a slave station to the master station. (For some areas
in a local station, data are input in the opposite direction.)
A remote register of the link device. This refers to word data output from the master station to a slave station. (For some
areas in a local station, data are output in the opposite direction.)
Remote input of the link device. This refers to bit data input from a slave station to the master station. (For some areas in a
local station, data are input in the opposite direction.)
Remote output of the link device. This refers to bit data output from the master station to a slave station. (For some areas in
a local station, data are output in the opposite direction.)
Link special relay. Bit data that indicates the operating status and data link status of a module on CC-Link IE.
• A generic term for a local station and remote station on CC-Link IE TSN
• A generic term for a local station, remote I/O station, remote device station, and intelligent device station on CC-Link IE
Field Network
A Seamless Message Protocol. This protocol is used to access an SLMP-compatible device or a CPU module connected to
an SLMP-compatible device from an external device such as a personal computer.
Link special register. Word data that indicates the operating status and data link status of a module on CC-Link IE.
A function of data communication unperiodically among nodes (station) on network.
A function used to send message to the target station when requested by a link dedicated instruction or the engineering tool
Communication is available with station on another network via relay station, or gateway.
No. that is assigned for transient transmission to any given stations. By specifying a group of stations as transient
transmission target, data can be sent to the stations of the same group No.
An authentication Class B hub authorized by CC-Link Partner Association
15