Mitsubishi Electric RD78G4 User Manual page 58

5.
The status of a station selected in "Network Status" is displayed in "Selected Station Communication Status Monitor".
( Page 57 "CC-Link IE TSN/CC-Link IE Field Diagnostics" window)
The station status is displayed on the top of "Selected Station Communication Status Monitor".
If an error occurs, a button indicating the error such as [PORT2 Communication Error] is displayed in "Selected Station
Communication Status Monitor". Click the button to check the error details and actions.
6.
Various tests and operations can be performed by clicking the "Operation Test" or "Selected Station Operation" on the
bottom left of the window. ( Page 62 Communication Test, Page 63 Remote Operation)
■When a setting other than "No Specification" is specified in "Other Station Setting" on the
"Specify Connection Destination Connection" window
1.
Connect the engineering tool to the CPU module.
2.
Start the CC-Link IE TSN/CC-Link IE Field diagnostics.
[Diagnostics]  [CC-Link IE TSN/CC-Link IE Field Diagnostics]
The CC-Link IE TSN/CC-Link IE Field diagnostics cannot be started when "Other Station (Co-existence
Network)" has been specified in "Other Station Setting" on the "Specify Connection Destination Connection"
window and "CC-Link" or "C24" has been specified in "Co-existence Network Route".
3.
Select the Motion module of the network No. to be diagnosed and click the [OK] button to start the CC-Link IE TSN/CC-
Link IE Field diagnostics.
4.
Step 4 and later is the same procedure as when "No Specification" is specified in "Other Station Setting" on the "Specify
Connection Destination Connection" window. ( Page 55 When "No Specification" is specified in "Other Station
Setting" on the "Specify Connection Destination Connection" window)
3 TROUBLESHOOTING
56
3.3 Checking the Network Status