Mitsubishi Electric RD78G4 User Manual page 62

In the following cases, the network map is displayed differently from the actual connection status.
Connection status
Two stations are connected through a switching hub.
Engineering tool
No.0
Switching hubs are in cascade connection.
Engineering tool
No.0
Precautions
Stations in offline mode are not displayed in the network map. In line topology, stations connected after a station in offline
mode are not displayed because they are disconnected.
3 TROUBLESHOOTING
60
3.3 Checking the Network Status
TSN HUB
TSN HUB
No.2
No.1
No.2
TSN HUB
No.4
Display of the network map
Branches are not displayed in the network map.
Only one branch is displayed.