Cushman Truckster XD 2018 Owner's Manual page 73

Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
STEERING TOE-IN ADJUSTMENT
Steering Toe-In Adjustment
1. Turn the front wheels to the straight position.
2. Loosen the jam nuts on both ends of the axial
rods.
3. Rotate the axial rods to get the correct toe-in. The
toe-in must not exceed +1/4 inch (+ 0.63 cm).
4. Tighten the jam nuts.
Jam
Nut
Jam
Nut
Owner's Guide
MAINTENANCE
Jam
Nut
Axial
Axial
Rod
Rod
2WD
Axle
Jam
Nut
Axial Axial
Rod Rod
4WD
Axle
B
67