Engine - Cushman Truckster XD 2018 Owner's Manual

Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.

ENGINE

NOTICE: The vehicle includes a separate engine manual prepared by the engine manufacturer. Read the engine
manual and know the operation and maintenance of the engine. Follow the engine manufacturer proce-
dures to obtain the maximum service life of the engine. Replacement engine manuals are available
from the engine manufacturer.
Operation and maintenance during the first 50 hours of a new engine affects the performance and life of the engine.
During the first 50 hours of operation, Cushman recommends the following for optimum performance and life of the
engine.
• Allow the engine to reach a temperature of at least 140° F (60° C) before operation at full load.
• Check the engine oil level two times each day. Oil usage during the first 50 hours of operation can be higher than
normal.
• Change the engine oil and oil filter after the first 50 hours of operation.
• Check the fan belt.
• Refer to the engine manual for specified maintenance intervals.
If the injection pump, injectors or the fuel system need service, contact your Cushman Dealer.
NOTICE: The vehicle operates correctly at the preset governor setting. Do not change the engine governor set-
ting or over speed the engine.
Engine Oil
Check the engine oil level each day before starting the
engine or at least five minutes after stopping the engine.
1. Park the vehicle on a level surface.
2. Remove the dipstick, remove oil with a cloth and
reinsert.
3. Remove the dipstick again and check the oil level.
The oil level must be between the two level indica-
tors on the dipstick.
Diesel
Engine
Gasoline
Engine
Owner's Guide
MAINTENANCE
Dipstick
Level
Indicators
B
53