Cleaning; Suitable Cleaning Agents; Cleaning The Enclosure; Cleaning The Scan Window - Bartec BCS 3600ex Series User Manual

Handscanner
BCS 3600 series
ex
9

Cleaning

9.1

Suitable cleaning agents

9.2

Cleaning the enclosure

9.3

Cleaning the scan window

9.4

Cleaning the contacts

Subject to technical modifications
Revision A / 04/2019
Component
Scan window
Hand-held scanner enclosure Damp cleaning cloths, isopropyl alcohol (70 %)
Hand-held scanner contacts
Table 66 Suitable cleaning agents
1. Moisten a soft, fluff-free cloth with a suitable cleaning agent and carefully wipe the enclosure of
the hand-held scanner.
2. Use a cotton wool bud to clean difficult to reach parts.
3. Allow the device to dry naturally until completely dry.
The scan window must be cleaned at regular intervals to ensure that barcodes are correctly decoded.
1. Clean the scan window with a cleaning wipe for glasses or camera lenses or with comparable
cleaning wipes.
2. Dry the scan window immediately to prevent smear formation, using a soft, fluff-free cloth to do
so.
Take the following steps to clean the battery contacts, contacts on the hand-held scanner, contacts
on the base station and the cable connectors for the hand-held scanner:
1. Soak cotton wool buds in isopropyl alcohol.
2. Remove grease and dirt deposits from the contacts using the cotton wool buds.
Wipe the cotton wool bud over the contacts at least three times.
–
3. Dry the contacts using a dry cotton wool bud.
Wipe the cotton wool bud over the contacts at least three times.
–
Cleaning agent
Cleaning wipes for glasses or for camera lenses
Cotton wool buds, isopropyl alcohol (70 %)
9 Cleaning
93 / 106