Testing The Communication (Rs232 Or Usb-Spp) - Bartec BCS 3600ex Series User Manual

7 Connection /
commissioning (qualified
personnel)

Testing the communication (RS232 or USB-SPP)

82 / 106
The serial communication can be checked with the help of a terminal program.
A serial interface does not have its own intelligence.
This means that incoming data at the serial interface will be lost if there is no application available that
can process incoming data.
There is a large number of terminal programs on the market. E.g. Hyperterminal, Tera Term, Putty or
others.
BARTEC does not distribute any terminal program or software keyboard wedge application.
When using a universal power supply module, a software wedge or other application must be
installed on the host PC for data transfer.
The software wedge or other application serves to convert the incoming data as keyboard input and
to enter the data into the currently active field on the host PC.
Terminal Program
The test described below with a terminal program was performed with the H-Term application. Any
other terminal program that supports serial communication can be used alternatively.
Test communication/data transmission
1. Open Terminal program
2. Select the serial interface to which the universal power supply module with coupled
BCS 36x8 is connected (In the example COM1).
ex
Can be checked in Device Manager
Handscanner
BCS 3600 series
ex
Subject to technical modifications
Revision A / 04/2019