Translation of the original, addendum to user manual 11-a1s4-7d0001, type 17-a1s4-*hp* atex / iecex zone 1/21 csa class i, ii, iii division , type b7-a2s4-*hp* atex / iecex zone 2/22 csa class i, ii, iii division 2 (10 pages)
Page 1
Type 17-A1S4-**** Type B7-A2S4-**** Status: May 2022 Reservation: Technical data subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages. BARTEC GmbH Max-Eyth-Straße 16 Fon: +49 7931 597-0 Support: em-support@bartec.com...
Handheld scanner BCS36x8 Table of content FAQ: Carriage Return & Line Feed Information of this FAQ ........................2 Reference documents ...................... 2 About Carriage Return & Line Feed ....................4 Data is transferred with two line breaks ..................... 5 Issue/Question ......................... 5 Applicable to ........................
BARTEC (global): www.bartec.de BARTEC (ACS): http://automation.bartec.de ‒ ‒ ZEBRA (ZEB): www.zebra.com In the event of an overlaps with Zebra, the instructions of BARTEC apply. Document BARTEC Explanation Download page BARTEC Quick-Start-Guide Instructions for commissioning and safe handling of global BCS 3608...
Page 5
Handheld scanner BCS36x8 FAQ: Carriage Return & Line Feed Zebra For DS3608-HP and DS3678-HP: Instructions for commissioning, operation, configuration, programming and maintenance of the For DS3608-ER and DS3678-ER: hand-held scanners (complete information can be Product Reference Guide found on the ZEBRA support page). ...
Handheld scanner BCS36x8 FAQ: Carriage Return & Line Feed About Carriage Return & Line Feed Background: The implementation of a line break in the computer world originally comes from the typewriter. In the development of operating systems and applications, however, the implementation was realized inconsistently.
Handheld scanner BCS36x8 FAQ: Carriage Return & Line Feed Data is transferred with two line breaks Issue/Question Suffix CR/LF is programmed but data is transferred with a second line break (blank line). On the scanner, the Enter key has been programmed as a suffix. The Enter is a Carriage Return (CR) Line Feed (LF).
Enter Carriage Return (CR) How is the suffix programmed? The Zebra "Product Reference Guide" serves as a reference. https://automation.bartec.de/scannerE.htm Programming of Enter (7013) CR/LF Scanning <Data> <Suffix 1> programmable code. Chapter 6 – 42 Scanning Scan Suffix 1 programmable code.
Handheld scanner BCS36x8 FAQ: Carriage Return & Line Feed Test of the transmitted data View in Notepad: Enter (1013) CR Enter (7013) CR/LF Testing the transmitted data string: The transmitted data can also be checked with the help of a terminal program. With the help of such a tool in the setting "Display as HEX"...
Page 12
Handheld scanner BCS36x8 FAQ: Carriage Return & Line Feed Check Enter (1013) CR The terminal program must be set to HEX. Then all transmitted characters are displayed as hex code. CR = Hex 0D Subject to technical changes. 10/10 05/2022...
Need help?
Do you have a question about the BCS 36 8ex Series and is the answer not in the manual?
Questions and answers