External Contacts; Communication Via Bluetooth - Bartec BCS 3600ex Series User Manual

Handscanner
BCS 3600 series
ex
4.4.2
4.4.3
Subject to technical modifications
Revision A / 04/2019

External contacts

DANGER
Non-approved accessories!
Loss of function and risk of explosion.
Only connect base stations and chargers that have been specified by BARTEC.

The approved accessories are shown in the system overview (see system overview, Chapter 15.2).
The model is clearly indicated on the type label.
Figure 10 External contact on Bluetooth hand-held scanner

Communication via Bluetooth

Three types of connection are available for communication of the hand-held scanner via Bluetooth:
Type of connection
Point-to-point mode
Multi-point-to-point mode
HID mode
Table 25 Communication via Bluetooth
Description
Hand-held scanner is connected to a base station, standard
mode
Up to 7 hand-held scanners are connected to one base
station. The connection between base station and hand-
held scanner can only be made with one device.
(No multi-point-to-point is possible with the universal supply
module. Only 1 hand-held scanner can therefore be
connected to the universal supply module).
Direct communication with Bluetooth host without base
station. The Bluetooth hand-held scanner can communicate
with a Bluetooth-enabled device (e.g. smartphone) directly
without a base station.
4 Product description
29 / 106