Connecting To The Hmi: Connecting The Hand-Held Scanner To The Hmi - Bartec BCS 3600ex Series User Manual

Handscanner
BCS 3600 series
ex
7.4

Connecting to the HMI: connecting the hand-held scanner to the HMI

Subject to technical modifications
Revision A / 04/2019
The function is only guaranteed if the cables you connect for your configuration have been specified
by BARTEC (see system overview, Chapter 15.2, P. 104).
Pay attention to the HMI manual.

When connecting to an HMI or other device, it must be ensured that the Ex-technically relevant values
are not exceeded or undercut.
Chapter 3.5 Observe Ex-relevant values when connecting to UVM or other systems.

Furthermore, it must be noted that the functional values listed in chapter 3.5 are also observed.
Connect the connection cable of the hand-held scanner in the HMI to the terminals provided for

this purpose.
7 Connection /
commissioning (qualified
personnel)
75 / 106