Damage To Eyes Caused By Laser Light; Risks Of Cuts If The Scan Window Is Broken; Health Hazard In The Case Of Incorrect Disposal; Preventing Damage To Property - Bartec BCS 3608ex-NI User Manual

Handscanners
BCS 3600 series
ex
2.4.2

Damage to eyes caused by laser light

2.4.3

Risks of cuts if the scan window is broken

2.4.4

Health hazard in the case of incorrect disposal

2.5

Preventing damage to property

2.5.1

Short circuit caused by incorrect connection

2.5.2

Storage at too high a temperature

2.5.3

Contact with chemicals

2.5.4

Aggressive cleaning agents

Subject to technical modifications
17/05/18
The hand-held scanner operates with a Class 2 laser. Laser beams can damage eyes.
Do not look into the laser beam.

The scan window may become damaged if the hand-held scanner falls down. There is a risk of cuts
if you reach into the broken or cracked area.
When getting the hand-held scanner out, secure it to prevent it falling down.

Only get the hand-held scanner out when it reaches its destination.

If the scan window is broken:

Do not touch the broken area.
–
Do not use the hand-held scanner.
–
Send the faulty hand-held scanner to BARTEC and reference the RMA number you were
–
issued.
Lithium ion batteries on the Bluetooth hand-held scanner contain pollutants that can be harmful to
health.
Dispose of batteries in an environmentally sound way in accordance with regional regulations.

Incorrect electrical connection can cause a short circuit, thereby damaging the hand-held scanner.
Always have the hand-held scanner connected by a qualified electrician in accordance with the

connection diagram.
A thermal fuse prevents the hand-held scanner getting too hot during operation and triggering an
explosion. There is also a risk of the hand-held scanner getting too hot if the hand-held scanner is
stored outside of the permissible ambient temperatures. The hand-held scanner is damaged as soon
as the thermal fuse responds.
Only store the hand-held scanner within the permissible ambient temperatures.

The enclosure of the hand-held scanner consists of polycarbonate that has only limited chemical
resistance. Contact with chemicals can break the enclosure.
Do not bring the hand-held scanner into contact with chemicals.

Aggressive cleaning agents can attack and fade the scan window, thereby impairing the scanning
functionality. In extreme cases scanning is no longer possible.
Only use a damp cloth to clean the hand-held scanner.

2 Safety
15 / 72