Handscanner
BCS 3600
series
ex
5
Transport and storage
5.1
Check the contents and condition of delivery
5.2
Storage
5.2.1
Subject to technical modifications
Revision A / 04/2019
1.
Unpack the product on delivery.
–
Repack for transport to the product's destination.
2.
Check that the contents are complete (see Chapter 14).
3.
Check all components for transport damage.
4.
Report transport damage and missing components to the transport company and your local
BARTEC sales office immediately.
Keep the transport packaging for any future returns.
Pay attention to the ambient conditions when storing the hand-held scanner and battery (see
Chapter 14).
Battery
Heat, cold, extreme environmental influences and serious damage caused by falls can lead to restricted
charge capacity, the rusting of metal parts and the escape of electrolyte.
There may a permanent reduction in quality if the battery is stored for more than six months.
The standard warranty period for batteries from BARTEC is 6 months, irrespective of whether they
are bought separately or together with a hand-held scanner.
Always store batteries charged to at least 50 % in a cool and dry place outside the device.
When storing for more than one year: check the state of charge at least once a year and charge
to at least 50 % of the charge capacity where necessary.
Replace the battery if there is a substantial reduction in the operating time.
Battery is UN38.3 conform.
Due to the transport guidelines for air freight, all batteries are delivered ex works charged to max.
30 %.
5 Transport and storage
43 / 106