Pairing Between Bluetooth Hand-Held Scanner And Base Station (Cradle) - Bartec BCS 3600ex Series User Manual

6 Configuration
6.5.2
56 / 106

Pairing between Bluetooth hand-held scanner and base station (cradle)

Base station is installed in the safe area and connected to a PC. The following interfaces are supported:
Interfaces
USB (HID or SPP)
RS232
Keyboard Wedge
IBM 468X/469X
Maximum functional ranges below.
Extension cables are not included in the product range.
* Maximum working range for USB is 5m.
** Maximum working range for RS232 is 15m.
Figure 18 Connection example between BCS 3678
There are two methods to realize the pairing with the base station.
Pairing – Methode 1
Each base station has an individual barcode for pairing.
The MAC address of the base station is stored in the barcode.
By scanning the pairing barcode in the default setting, a scanner can establish a point-to-point
connection with a base station.
Figure 19 Representation of the pairing between scanner and base station
Use the hand-held scanner to scan the barcode (1) attached to the base station.

The hand-held scanner is connected to the base station and ready for use.

Distances Connection cable
4,5 m* Yes, see accessories list for the respective Ex-version
of the scanner.
4,5 m**
4,5 m On request (no cables in current program)
4,5 m On request (no cables in current program)
and the base station
ex
Handscanner
BCS 3600 series
ex
Subject to technical modifications
Revision A / 04/2019