Transport And Storage; Check The Contents And Condition Of Delivery; Storage; Battery - Bartec BCS 3608ex-NI User Manual

Handscanners
BCS 3600 series
ex
5

Transport and storage

5.1

Check the contents and condition of delivery

5.2

Storage

5.2.1

Battery

Subject to technical modifications
17/05/18
1. Unpack the product on delivery.
Repack for transport to the product's destination.
–
2. Check that the contents are complete (see Chapter 13, P. 68).
3. Check all components for transport damage.
4. Report transport damage and missing components to the transport company and your local
BARTEC sales office immediately.
Keep the transport packaging for any future returns.
Pay attention to the ambient conditions when storing the hand-held scanner and battery (see
Chapter Fehler! Verweisquelle konnte nicht gefunden werden., P. Fehler! Textmarke nicht
definiert.).
Heat, cold, extreme environmental influences and serious damage caused by falls can lead to
restricted charge capacity, the rusting of metal parts and the escape of electrolyte.
There may a permanent reduction in quality if the battery is stored for more than six months.
The standard warranty period for batteries from BARTEC is 6 months, irrespective of whether they
are bought separately or together with a hand-held scanner.
Always store batteries charged to at least 50 % in a cool and dry place outside the device.

When storing for more than one year: check the state of charge at least once a year and charge

to at least 50 % of the charge capacity where necessary.
Replace the battery if there is a substantial reduction in the operating time.

5 Transport and storage
37 / 72